V.ORLANDI E 50 Installation, Operating And Maintenance Instructions page 48

INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
This chapter refers to the figures on pages 16-20/32.
Read the following instructions carefully before any operation:
Wear working gloves
ATTENTION: make sure that the coupling is closed ie the coupling pin
(14) and the operating handle (22A-22B) are down during all
maintenance operations.
N All moving parts of the coupling are subject to wear caused by normal
O
use. Extent of wear depends on working conditions and maintenance
T
operations carried out.
E
Therefore regular lubrication and maintenance will help prolong the life
and safety of the coupling.
DRAWBAR COUPLING E 50
4 MAINTENANCE
PAG.
16/32
CHAP . 4
REV. F
22A 22B
14