EchoLife HG861 GPON Terminal
l
3.3.2 Common Commands
Table
Table 3-1 Common commands for the HG861
Operation
Enter the privilege mode
Enter the global config
mode
Exit the current mode and
enter the upper-level mode
or exit the configuration
interface
Reboot
Save the config data
Upgrade the ONT
Query the RF status
3.4 Maintaining the ONT Through the CLI
This topic describes how to maintain the ONT through the CLI.
3.4.1 Setting Up a Maintenance Environment (Local)
3.4.2 Upgrading the ONT (from the Local Device)
This topic describes how to remotely upgrade the ONT through the CLI on the local device.
Issue 01 (2009-07-30)
Figure 3-1 Relations between the command modes
Online Help of CLI
The CLI provides the following online helps:
Enter a command and then enter multiple ?s that are separated by a space. As a result,
–
the next keyword that can be entered and the help information are displayed.
Enter a command and then enter a character string followed immediately by ?. As a
–
result, the help information about the previous command is displayed.
Enter a command and then press Tab. If the position is a keyword, the keywords of the
–
command are supplemented completely.
Table 3-1
lists the common commands for the HG861.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Command
HG861>enable
HG861#configure terminal
exit (any mode)
HG861>reboot
HG861>save
HG861>upgrade
HG861>display rf status
3 Configuration Guide
3-5