Using The Stb; Using The Pc - Huawei EchoLife HG861 Manual

4 ONT Downstream User Guide

4.1 Using the STB

This topic describes how to configure the STB connected to the HG861 in the downstream
direction.
Procedure
Step 1 Connect the device.
For how to connect the STB, see
properly.
Step 2 Turn on the power supply.
Power on the HG861, TV set, and STB.
Step 3 Configure the IP address of the STB.
There are three methods for configuring the IP address of the STB:
l
l
l
Step 4 Enjoy the high-speed video service.
Watch the program according to the prompt.
----End

4.2 Using the PC

This topic describes how to configure the PC connected to the HG861 in the downstream
direction.
Procedure
Step 1 Connect the device.
For how to connect the PC, see
properly.
Step 2 Turn on the power supply.
Power on the PC and HG861.
Step 3 Configure the IP address of the PC.
There are three methods for configuring the IP address of the PC.:
l
l
4-2
Configuring the static IP address
Obtaining the IP address dynamically through the DHCP server.
Obtaining the IP address through the PPPoE dialup.
NOTE
The service provider determines a specified method.
Configuring the static IP address
Obtaining the IP address dynamically through the DHCP server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2.3 Installation Guide. Make sure that the STB is connected
2.3 Installation Guide. Make sure that the PC is connected
EchoLife HG861 GPON Terminal
Issue 01 (2009-07-30)