Installation Instructions - AirSep Topaz Instruction Manual

®
AirSep Corporation
5.3

Installation Instructions

1)
Topaz/Topaz+/Topaz Ultra Instruction Manual
Locate the oxygen generator in an area where the ambient
air temperature remains between 4 C (40 F) and 40 C
(104 F) to prevent damage not covered under the AirSep
Corporation Product Warranty.
The generator should only be used in the manner specified
in the manual to prevent damage not covered in the AirSep
Corporation Product Warranty.
AirSep oxygen generators are sold for indoor use only.
Make sure the area that surrounds the oxygen generator is
well ventilated, and provide sufficient space around the unit
[at least one meter (three feet)] to allow for cool air flow as
well as to allow safe operation and maintenance.
To ensure optimum performance of the oxygen generator and
prevent damage not covered under the AirSep Corporation Product
Warranty, make sure location of the unit meets the following
conditions:
Locate the unit in an area that is protected from the weather
elements and where the ambient temperature remains within
the specifications in the Appendix A of this instruction manual.
To enable adequate airflow to cool the unit, locate the unit
away from any source of heat, and make sure the sides of the
unit remain at least six inches away from any wall or other
obstruction.
Locate the unit within ten feet of a grounded electrical outlet
that cannot be turned off accidentally.
Connect the unit to electrical power that continuously meets
the specifications in the Appendix A of this instruction manual.
Do not position the equipment in an area
that makes it difficult to disconnect the
power.
Do not use extension cords with the
oxygen generator.
5-3