Installation Instructions - AirSep AS-20 Instruction Manual

®
AirSep Corporation
5.3
Refer to Figure 5-1 below for the recommended installation arrangement for the
oxygen generator. The numbers in the drawing correspond to the step numbers in
this section.
1) Connect the red air hose provided with the oxygen generator accessories
from the on-site air supply to the feed air inlet connection on the oxygen
generator. Refer to the Table 5.1 to determine the proper size for the feed air
inlet connection and feed air hose for your model.
AS-20—1000 Instruction Manual
Do not disconnect protective earth:

Installation Instructions

1
3
4
Figure 5-1 Typical Installation Arrangement
2
12/02
5-3