AirSep Topaz Instruction Manual page 22

2)
3)
5-4
Place the oxygen generator in an upright position on a level surface.
Connect the oxygen outlet to the inlet of your application.
Use only oxygen-compatible materials for the
hoses, tubing, and connections between the
oxygen outlet and the inlet to your application.
If you use tubing at the inlet to your application, connect to the
oxygen outlet the barb and fastener provided in the plastic bag
shipped with the unit. Insert the barb into the tubing connected to
your application, and clamp the tubing securely to the barb.
Clean your hands thoroughly before handling the
barb and fastener. Make sure the tools used to
secure the connection between the oxygen
outlet and your application does not contaminate
the hoses, tubing, or connections with oil or
other petroleum-based products.
If a continuous supply of oxygen is critical to
your application, provide a backup source of
oxygen to use if a power failure or equipment
malfunction occurs.
Topaz/Topaz+/Topaz Ultra Instruction Manual
®
AirSep Corporation