Removing A Power Supply Unit - Dell XC6320 Owner's Manual

Table 9. PSUs configuration
PSU System boards
1600 W Up to two 120 W processor per system board, six hard drivesper system board, and 16
memory modulesper system board

Removing a power supply unit

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
CAUTION: The system requires at least one power supply unit (PSU) to operate normally.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Turn off the system, including any attached peripherals.
3. Disconnect the power cable from the power source and the PSU, and disconnect the peripherals.
Press the release lever and by using the handle, slide the PSU out of the system.
NOTE: Removing the PSU may require considerable force.
Figure 17. Removing and installing a PSU
1. fan 2. PSU
49