6/52
About this documentation
Bosch Rexroth AG, VT-MRMA1-1, RE 30214-B/03.2019
• Warning symbol: draws attention to a hazard
• Signal word: identifies the degree of hazard
• Type and source of hazard: identifies the type or source of the hazard
• Consequences: describes the consequences in the case of non-observance
• Precautions states, how the hazard can be avoided
Table 2: Hazard classes according to ANSI Z535.6-2011
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2
Symbols
The following symbols refer to notes, which are not relevant to safety, but increase
the legibility of the documentation.
Table 3: Meaning of symbols
Symbol
Meaning
If this information is disregarded, the product cannot be used or operated
in an optimum manner.
▶
Individual, independent action
1.
Numbered instructions for action:
The numbers indicate that the activities are to be carried out consecutively.
2.
3.
1.3.3
Terms used
The following terms are used in this documentation:
Table 4: Terms used
Term
Meaning
VT-MRMA1
Analog amplifier module
UB
Operating voltage
HM20
Pressure transducer
1.3.4
Abbreviations used
The following abbreviations are used in this documentation:
Table 5: Abbreviations used
Abbreviation
Meaning
EMC
ElectroMagnetic Compatibility
PE
Protective Earth
PELV
Protective Extra Low Voltage
Meaning
Indicates a hazardous situation which, if not avoided, will
certainly result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Damage to property: The product or the environment can be
damaged.