Table of Contents
Advertisement
44/52
Demounting and replacement
Bosch Rexroth AG, VT-MRMA1-1, RE 30214-B/03.2019
11 Demounting and replacement
11.1 Preparing demounting
Improper demounting!
The device can be destroyed!
▶
Decommission the entire system as described in the general instructions for the
system.
▶
Disconnect the device and all connected components from the power supply.
11.2 Demounting
Remove the analog amplifier from the DIN rail as described in chapter "Installation",
Fig. 7 on page 27.
The plug-in screw connectors are to be removed as shown on Fig. 11, page 32.
11.3 Preparing the components for storage or further use
Proceed as follows in order to prepare the VT-MRMA1-1 for storage and further use:
▶
Only use the original packaging for storage.
▶
Observe the permissible storage temperature range specified in data sheet
30214.
▶
Protect the analog amplifier module from dust and humidity.
12 Disposal
12.1 Environmental protection
Careless disposal of the VT-MRMA1-1 and the packaging material could lead to
pollution of the environment.
▶
Therefore, dispose of the analog amplifier module and the packaging material in
accordance with the currently applicable regulations in your country and recycle
the material as far as possible.
13 Extension and conversion
The analog amplifier module VT-MRMA1-1 may be neither extended nor converted. If
you convert the amplifier module, the warranty becomes void.
NOTICE
Advertisement
Table of Contents
