Bosch Rexroth CS351 Manual page 31

CS351 | 3609929B45/2014-09
Serial interface X3C2
The interface is intended for connection of a
printer or scanner to the computer unit. The
interface supports the RS232, RS422 and
RS485 protocols.
It is designed as 9-pin male Sub-D socket.
1
6
Fig. 23: 9-pin Sub-D socket (male)
The cable between the connected device
and the serial interface may be no longer than
30 m.
DVI interface XDVI2
This interface is intended for the connection
of an external TFT monitor. The interface is
designed as a socket according to DVI spe-
cification.
It provides for connection of a digital monitor
having a resolution of, e.g.,.1280 x 1024.
The cable between the connected monitor
and the DVI interface XDVI2 may be no lon-
ger than 5 m.
It is not possible to connect a VGA monitor
For further information about the design of
the DVI-D socket and its pin assignment, re-
fer to page 77 et seq.
5
9
Bosch Rexroth AG
USB interfaces X3U6, X3U7, X3U8
These interfaces are designed as type A so-
ckets. They meet the requirements according
to USB Specification 2.0.
These sockets are intended for connection of
a mouse, a keyboard or an external storage
medium.
The cable between the connected USB de-
vice and the USB interface X3U6, X3U7 oder
X3U8 may be no longer than 3 m.
1 2 3
Fig. 24: USB socket, type A
Tab.17: X3U6, X3U7, X3U8 assignment
Description/
Pin Signal
function
1 VCC 5 V supply
2 USB_Data– Receive USB
data
3 USB_Data+ Receive USB
data
4 GND Reference po-
tential for all volt-
ages
Ethernet interfaces X7E4, X7E5
The integrated computer unit features two
Ethernet interfaces. The interfaces have an 8-
pin RJ45 socket (10/100 BaseT) design.
• The X7E4 Ethernet interface is connected
to the computer unit and the controller of
the compact system via the internal switch.
• The X7E5 Ethernet interface is directly
connected to the integrated computer unit.
For further information about the design of
the RJ45 socket, its pin assignment and the
states of its LEDs, refer to page 74.
83/108
Product description
4
Volt-age/
current
5 V= / 0.5
A
PE poten-
tial