Table of Contents
Advertisement
98/108
Bosch Rexroth AG
Maintenance and repair
Fig. 40:
Changing the battery (computer unit)
• Remove the discharged battery by hand
or using tweezers which must be made of
non-conducting material. Under no cir-
cumstances may conductive tools be
used to remove the battery - short circuit
danger.
Fig. 40 shows the position of the battery
in the white circle.
• Insert the new battery. Positive pole at the
front. Press the battery into the holder un-
til it engages.
• Attach the cover. The tightening torque
for the bolts is 1.4 + 1 Nm.
Please observe the battery disposal instruc-
tions in chapter 2, section " Disposal".
CS351 | 3609929B45/2014-09
Cleaning and care
CAUTION
Any dirt or liquids penetrating the
device lead to malfunctions!
Safe function of the Compact System is
no longer assured.
Always ensure absolute cleanliness
when working on the Compact Sys-
tem.
Do not use a high-pressure cleaner.
CAUTION
Damage to the surface caused by
solvents and aggressive detergents!
Aggressive detergents can damage the
seals on the Compact System and cause
them to age faster.
Never use solvents or aggressive de-
tergents.
Do not use a high-pressure cleaner for
cleaning.
Cover all openings with the appropriate pro-
tective caps/equipment.
Check that all seals and plugs for the plug
connections are firmly fitted so that no hu-
midity can penetrate the Compact System
during cleaning.
Avoid causing damage when cleaning the
Compact System, especially to the TFT dis-
play, by only wiping it with a damp cloth.
Avoid contact of the display with hard,
sharp-edged objects.
Hide quick links:
Advertisement
Table of Contents
