Videx VX2300 Installation Handbook
  1. Manuals
  2. Brands
  3. Videx Manuals
  4. Intercom System
  5. VX2300
  6. Installation handbook
Videx VX2300 Installation Handbook

Videx VX2300 Installation Handbook

“2 wire” audio/video door entry system
Hide thumbs Also See for VX2300:
Table of Contents

Advertisement

Quick Links

Download this manual
English
VX2300
DIGITAL SYSTEM
"2 Wire" Audio/Video Door Entry System
67009600-EN
Edition 2015
Rev. 1.0
Installation handbook
We recommend
This equipment is installed by a
Competent Electrician, Security or
Communications Engineer.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VX2300 and is the answer not in the manual?

Questions and answers

Related Manuals for Videx VX2300

Summary of Contents for Videx VX2300

  • Page 1 English VX2300 DIGITAL SYSTEM “2 Wire” Audio/Video Door Entry System Installation handbook We recommend 67009600-EN This equipment is installed by a Edition 2015 Competent Electrician, Security or Rev. 1.0 Communications Engineer.

  • Page 2: Table Of Contents

    Addresses table for dip-switch banks ............................76 Installation diagrams ..................................80 Introduction The VX2300 VIDEX Digital system is a complete video door entry system based on a two wire BUS. The main features are the following: • 2 wire bus (not polarity conscious);...
  • Page 3 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 4302N Digital call panel Switch 1 OFF = Main Camera internal Switch 1 ON = Main Camera External Switch 2 OFF = Audio/Video Call Made in Italy Switch 2 ON = Audio Call...
  • Page 4 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 4302N Digital call panel PROGRAMMING The programming of the unit can be carried out from the panel keypad or a PC via RS-232 serial connection and the PC programming software. The programming step 6.3 is only available if the panel is programmed as “MAIN” (main door panel in a system with main en- trance and secondary entrances using Art. 2306 exchangers).

  • Page 5: Art. 4302N Digital Call Panel

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 4302N Digital call panel Notes 1 The trade code is the door opening code reserved to periodic visitors like postman, milkman etc. The trade code only works if the TRD input is shorted to ground.
  • Page 6 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 4303N Speaker unit module with built-in functional to digital interface White White Blue Blue Fig. 1 Fig. 2 DESCRIPTION Functional speaker module for up to 64 traditional call buttons. The unit circuitry incorporates : •...
  • Page 7 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 4303N Speaker unit module with built-in functional to digital interface FRONT LEDS SIGNALLING DESCRIPTION When illuminated, indicates that it is not possible to make a call because a call or a conversation is in progress (from the outdoor station from which you are calling or from another outdoor station on systems with multiple entranc- es).

  • Page 8: Art. 4303N Speaker Unit Module With Built-In Functional To Digital Interface

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 4303N Speaker unit module with built-in functional to digital interface SIGNALS ON SYSTEM CONNECTION TERMINALS Addresses 5,13,21,29,37,45,53, 61 (switch 6 = OFF) Common terminal for addresses 1..8 (switch 6 = OFF) or 65..72 (switch 6 = ON)
  • Page 9 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 4303N Speaker unit module with built-in functional to digital interface UNIT SPECIFICATION Housing/Mounting: One 4000 Series Module / 4000 Series Modular System Push Buttons: Yes, from 0 to 2 call buttons according to the model...
  • Page 10 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 4330N Camera module specific for VX2300 Digital System Fig. 1 Fig. 2 DESCRIPTION This module is equipped with a CCD camera with auto iris lens complete with LED’s for illumination . The module is available in black and white or colour version (put “/color”...
  • Page 11 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System 4000 Series Surface and flush mounting door station installation EXAMPLE: INSTALLING A FOUR MODULE OUTDOOR STATION fig. 1 fig. 2 fig. 3 fig. 4 fig. 5 fig. 6 fig. 7 fig.

  • Page 12: 4000 Series Surface And Flush Mounting Door Station Installation

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System 4000 Series Surface and flush mounting door station installation INSTALLING A SURFACE MOUNT DOOR STATION 1. Place the surface box against the wall (165-170cm between the top of the box and the floor level as shown in Fig. 1) and mark the fixing holes for the wall plugs and the hole for the cables E (fig. 2).
  • Page 13 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 3181 Digital intercom for VX2300 2 Wire System Fig. 1 Fig. 2 DESCRIPTION Intelligent intercom with “door open/intercommunicating call” push button (key), bus relay (Art. 2305) activation button (dot), “pri- vacy ON-OFF” switch, “door open” and “privacy on” Led’s and call tone volume control (3 levels). To reduce bus current all apartment devices are in a sleep mode when not used.

  • Page 14: Art. 3181 Digital Intercom For Vx2300 2 Wire System

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 3181 Digital intercom for VX2300 2 Wire System PROGRAMMING After each programming operation carried out through dip-switches or jumpers it is necessary to temporary disconnect the phone from the BUS or from the power supply if locally powered.
  • Page 15 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 3181 Digital intercom for VX2300 2 Wire System NUMBER OF RINGS The number of rings can be set to 3 (factory preset) or 6. To change the number of rings proceed as follow: •...
  • Page 16 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 3183 Digital intercom for VX2300 2 Wire System Fig. 1 Fig. 2 DESCRIPTION Intelligent intercom with “door open/intercommunicating call” push button (key), bus relay (Art. 2305) activation button (dot) and call tone volume control (3 levels). To reduce bus current all apartment devices are in a sleep mode when not used. In case a user forgot to replace the handset, each operation must be executed within 10 seconds of lifting the handset otherwise the handset returns to its sleep state.

  • Page 17: Art. 3183 Digital Intercom For Vx2300 2 Wire System

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 3183 Digital intercom for VX2300 2 Wire System PROGRAMMING After each programming operation carried out through dip-switches or jumpers it is necessary to temporary disconnect the phone from the BUS or from the power supply if locally powered.
  • Page 18 In addition to programming required from the VX2300 digital system (address, extension address and intercommunication mode) it is possible to program the melody, the number of rings and the privacy service duration. Surface wall mount installation.

  • Page 19: Art. 5188 Hands Free Intercom

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 5188 Hands free intercom PUSH BUTTONS, LEDS AND CONTROLS (FIG. 1) LED 1 Programming LED. LED 2 LED relating to the operation of the answer/switch off/camera recall/simplex button. LED 3 LED relating to the operation of privacy button.
  • Page 20 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 5188 Hands free intercom VIDEOPHONE ADDRESS – SW1.1..7 The table below shows how to set the address of the videophone. Considering that ON = 1 and OFF = 0, multiply each digit for the relevant decimal weight then sum values obtained to get the address: E.g.
  • Page 21 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 5188 Hands free intercom SPECIFICATION Housing/Mounting: 5000 Series Intercoms / direct wall mount Push buttons: Yes, 4 Programming: Yes, carried out by the dip-switches located on the rear of the videophone...
  • Page 22 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System 5000 Series Hands free intercom wall mounting instructions Fig. 1 Fig. 3 Fig. 5 Fig. 2 Fig. 4 Fig. 6 1. As shown in Fig. 1, looking at the rear of the intercom, insert the tip of a flat blade screwdriver into one of the two openings (Fig.
  • Page 23 Fig. 2 DESCRIPTION An intelligent Videophone using 3.5” full colour active matrix LCD monitor for VX2300. Including 3 buttons “camera recall”, “door- open/intercommunicating call”, “privacy/service” plus 3 LED’s* for visual indication of all functions. Adjustments & programmable options: call tone volume on 3 levels (low, medium, high), picture hue, brightness and contrast, call tone melody, number of rings, privacy duration and address.

  • Page 24: Art. 3686 Digital Videophone

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 3686 Digital videophone PUSH BUTTONS, LEDS AND CONTROLS (FIG. 1) On LED. It illuminates when the videophone is switched ON. Generic use LED. It is supplied from the terminals “6” and “7” of the PCB connection board Art. 5980. Normally used to signal the door status (open or closed).
  • Page 25 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 3686 Digital videophone VIDEOPHONE ADDRESS – SW1.1..7 The table below shows how to set the address of the videophone. Considering that ON = 1 and OFF = 0, multiply each digit for the relevant decimal weight then sum values obtained to get the address: E.g. as highlighted in the SW1.1..7...
  • Page 26 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 3686 Digital videophone VIDEOMONITOR CONNECTION BOARD ART. 5980 SIGNALS ON CONNECTION TERMINALS Terminal Signal Description Ground BUS1 Bus input Dry contacts relay common contact (during a conversation, keep pressed the button for more than 3 seconds to enable the internal link between terminals “3”...
  • Page 27 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System 3600 Series Videophone wall mounting instructions Fig. 2 Fig. 1 Fig. 3 Fig. 5 Fig. 4 1. Cables must be fed through the opening E (Fig. 2) of the mounting plate C, which should be fitted approximately 135cm from finished floor level as shown in Fig.
  • Page 28 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. SL5488N Slim hands free videomonitor 1 2 3 6 7 8 1 2 3 4 1 2 3 6 7 8 1 2 3 4 SEL1 130,00 Fig. 1 Fig. 2 DESCRIPTION An intelligent Hands-free surface video monitor employing a colour 3.5”...

  • Page 29: Art. Sl5488N Slim Hands Free Videomonitor

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. SL5488N Slim hands free videomonitor PUSH BUTTONS, LEDS AND CONTROLS (FIG. 1) Intercommunicating call button. For an intercommunicating call, when the videomonitor is in stand-by, press as many times as the extension or ad- dress value to call.
  • Page 30 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. SL5488N Slim hands free videomonitor MELODY SELECTION • When in the programming mode, press left or right call tone volume control buttons (press the left button to navigate back- ward or the right button to navigate forward in the melodies selection menù) until the videomonitor plays the selected melody (during the melody play the LED1 stops flashing).
  • Page 31 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. SL5488N Slim hands free videomonitor EXTENSION NO – SW.2..3 If the intercommunication between apartments is enabled (switch 1 of SW3 = ON) EXTENSION NO. leave these two switches in default position (both to OFF). Otherwise, if the inter- OFF 1 (default, master) SW3.2..3...

  • Page 32: 5000 Series Videomonitor Wall Mounting Instructions

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System 5000 Series Videomonitor wall mounting instructions 5000 Series Videomonitor wall mounting instructions Fig. 1 Fig. 2 Fig. 3 Fig. 4 1. To install Art.SL5456 it is necessary to open it. Follow picture Fig. 4: turn screw “G”, pull cover “D” and lift it up (or push it forward if the videomonitor is in horizontal position), then disconnect plug “E”...
  • Page 33 Fig. 2 DESCRIPTION An intelligent Videophone using 3.5” full colour active matrix LCD monitor for VX2300. Including 4 buttons “service”, “privacy/bus relay activation”, “door- open/intercommunicating call” and “camera recall” plus 3 LED’s for visual indication of all functions. Adjust- ments & programmable options: call tone volume on 3 levels (low, medium, high), picture hue, brightness and contrast, call tone melody, number of rings, privacy duration and address.

  • Page 34: Art. 6286 3.5" Colour Display Videophone

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 6286 3.5" colour display videophone PUSH BUTTONS, LEDS AND CONTROLS (FIG. 1) Privacy on LED. It illuminates when the privacy service is enabled. Generic use LED. It is controlled from the terminals “+DOL” and “-DOL”. Normally used to signal the door status (open or closed).
  • Page 35 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 6286 3.5" colour display videophone VIDEOPHONE ADDRESS – SW1.1..7 The table below shows how to set the address of the videophone. Considering that ON = 1 and OFF = 0, multiply each digit for the relevant decimal weight then sum values obtained to get the address: E.g.
  • Page 36 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 6286 3.5" colour display videophone SIGNALS ON CONNECTION TERMINALS BUS1 Bus input BUS2 Bus input Ground +12VM +12Vdc power supply input for version with memory board option Ground +VAUX Auxiliary power supply input (to be used when the switch 4 of SW3 is set to ON) button is pressed.
  • Page 37 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System 6200 Series Videophone wall mounting instructions Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 1. In order to install the videophone, it is necessary to remove the cover, which contains all the electronics, from the base: firstly disconnect the handset from the videophone (by removing its plug from the videophone), then press lightly the bottom part of the videophone and simultaneously pulling outwards the upper part as shown in Fig.
  • Page 38 Fig. 1 Fig. 2 DESCRIPTION An intelligent hands free videophone using 3.5” full colour active matrix LCD monitor for VX2300. Including 4 buttons “service”, “privacy/bus relay activation”, “door-open/intercommunicating call” and “answer/camera recall” plus 3 LED’s for visual indication of all functions.

  • Page 39: Art. 6388 3.5" Hands Free Colour Display Digital Videophone

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 6388 3.5" hands free colour display digital videophone PUSH BUTTONS (FIG. 1) Answerpush button. On an incoming call, operation of this button allows the user to answer and converse with the visitor. The relevant LED will illuminate.
  • Page 40 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 6388 3.5" hands free colour display digital videophone VIDEOPHONE ADDRESS – SW1.1..7 The table below shows how to set the address of the videophone. Considering that ON = 1 and OFF = 0, multiply each digit for the relevant decimal weight then sum values obtained to get the address: E.g.
  • Page 41 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 6388 3.5" colour display videophone SIGNALS ON CONNECTION TERMINALS Signal Description BUS1 Bus input BUS2 Bus input Ground +12Vdc power supply input for version with Memory Board option Ground Auxiliary power supply input (to be used when the switch 4 of SW3 is set to ON) Dry contact Max 50Vdc @ 100mA.
  • Page 42 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System 6300 Series Wall mounting instructions Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 1. In order to install the videophone, it is necessary to remove the cover, which contains all the electronics, from the base: press lightly on the bottom part of the videophone and simultaneously pulling outwards the upper part as shown in Fig.
  • Page 43 BUS1 Fig. 1 DESCRIPTION An intelligent hands free videophone using 4.3” full colour active matrix LCD monitor for VX2300. Including 4 buttons “service”, “privacy/bus relay activation”, “door-open/intercommunicating call” and “answer/camera recall” plus 3 LED’s for visual indication of all functions.

  • Page 44: Art. 6488 4.3" Hands Free Colour Display Digital Videophone

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 6488 4.3" hands free colour display digital videophone PUSH BUTTONS (FIG. 1) Answerpush button. On an incoming call, operation of this button allows the user to answer and converse with the visitor. The relevant LED will illuminate.
  • Page 45 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 6488 4.3" hands free colour display digital videophone VIDEOPHONE ADDRESS – SW1.1..7 The table below shows how to set the address of the videophone. Considering that ON = 1 and OFF = 0, multiply each digit for the relevant decimal weight then sum values obtained to get the address: E.g.
  • Page 46 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 6488 4.3" colour display videophone SIGNALS ON CONNECTION TERMINALS Signal Description BUS1 Bus input BUS2 Bus input Ground +12Vdc power supply input for version with Memory Board option Ground Auxiliary power supply input (to be used when the switch 4 of SW3 is set to ON) Dry contact Max 50Vdc @ 100mA.
  • Page 47 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System 6400 Series Wall mounting instructions Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 1. In order to install the videophone, it is necessary to remove the cover, which contains all the electronics, from the base: press lightly on the right part of the videophone and simultaneously pulling outwards the left part as shown in Fig.
  • Page 48 DESCRIPTION Intelligent Hands free video monitor for the VX2300 digital system using 3.5” OSD full colour active matrix LCD monitor, with touch sen- sitive buttons for “door open / service” , “answer/camera recall”, “privacy / bus relay” plus 5 navigation menu buttons and 3 LEDs related to the videophone operation.

  • Page 49: Art. Krv88-Krv86 3.5" Hands Free Videomonitor For Vx2300 Digital System

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. KRV88-KRV86 3.5” Hands free videomonitor for VX2300 digital system PUSH BUTTONS AND CONTROLS (FIG. 1 - FIG. 2) Answer Button Press this button during an incoming call to open the speech in duplex mode allowing free speech with the caller in both directions (The related LED will illuminate).
  • Page 50 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. KRV88-KRV86 3.5” Hands free videomonitor for VX2300 digital system PROGRAMMING The programming consists of a number of settings that in part are carried out by a specific OSD menu and the rest...
  • Page 51 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. KRV88-KRV86 3.5” Hands free videomonitor for VX2300 digital system INTERCOMMUNICATION MODE – SW3.1 This switch establishes the intercommunication mode: in OFF position (default) intercommunication is between units in the same apartment (same addresses but different extension); in ON position the intercommunication is between SW3.1...
  • Page 52 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. KRV88-KRV86 3.5” Hands free videomonitor for VX2300 digital system DURING THE CONVERASTION During the conversation (Fig. 12): 1 5 / 1 2 / 1 1 1 4 . 5 ° C...
  • Page 53 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. KRV88-KRV86 3.5” Hands free videomonitor for VX2300 digital system TERMINALS Alarm input (not implemented yet) Local bell input (active low) LB_AL Ground output for use in combination with “AL” & “LB” active low inputs Auxiliary LED power supply input (+12Vdc –...
  • Page 54 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Kristallo Series 3.5" flush and surface videomonitor wall mounting instructions fig. 1b fig. 1 fig. 1a fig. 2 fig. 3 fig. 3a fig. 2a fig. 4a fig. 4b fig. 4 VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev.

  • Page 55: Kristallo Series 3.5" Flush And Surface Videomonitor Wall Mounting Instructions

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Kristallo Series 3.5" Flush and surface videomonitor wall mounting instructions FLUSH MOUNT KRISTALLO VIDEOPHONE 1. Protect the holes to fix the videophone to the flush mounting box then embed the flush mounting box in line with the wall in a vertical position at 135cm height from the floor as shown in figure 1.
  • Page 56 DESCRIPTION Intelligent Hands free video monitor for the VX2300 digital system using a 7” 800x480 pixel resolution full colour active matrix LCD monitor with capacitive touch sensitive buttons for “door open/concierge call” , “answer/camera recall”, “auxiliary service“, “privacy” plus 4 buttons for adjustment and programming and 2 LED’s related to the videophone operation.
  • Page 57 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. KRV782 Hands free videomonitor for VX2300 digital system) OPERATION DURING STAND-BY Camera recall Press a number of times equal to the ID value of the door panel to switch ON.
  • Page 58 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. KRV782 Hands free videomonitor for VX2300 digital system) PROGRAMMING All programming options are available only when the system is in stand-by. NUMBERS OF RINGS 1. Press and keep pressed “...
  • Page 59 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. KRV782 Hands free videomonitor for VX2300 digital system) EXTENSION NO – SW.2..3 If the intercommunication between apartments is enabled (switch 1 of SW3 = ON) EXTENSION NO. leave these two switches in default position (both to OFF). Otherwise, if the inter- OFF 1 (default, master) SW3.2..3...
  • Page 60 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Kristallo Series 7" flush and surface videomonitor wall mounting instructions REMOVE THE BACK COVER Fig. 1 Fig. 2 1. To install the videophone, it is necessary to remove the back cover. Apply pressure to the two openings indicated by the grey arrows (Fig.

  • Page 61: Kristallo Series 7" Flush And Surface Videomonitor Wall Mounting Instructions

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Kristallo Series 7" flush and surface videomonitor wall mounting instructions SURFACE MOUNTING INSTRUCTIONS Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 1. First of all remove the back cover as described on the previous page;...
  • Page 62 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 317N Active/passive four way distribution box BUS OUT 1 BUS OUT 2 BUS OUT 3 BUS OUT 4 Close Close Close Close Open Open Open Open AMPLIFICATION Fig. 1 Fig. 2 DESCRITPION The unit distributes the bus signal to 4 outputs linked to videophones or intercoms.
  • Page 63 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 318 Two way passive distribution box OUT1 OUT2 Art.318 Close Open Fig. 1 Fig. 2 DESCRIPTION The unit distributes the bus signal to 2 outputs linked to videophones or intercoms. It is a passive distributor, so there is no possi- bility to adjust the video amplification.
  • Page 64 The BUS line must be interrupted and connected to the BUS-IN input, then the signal from the BUS-OUT will be amplified. Connect to the PS input a power supply Art. 2321. We suggest the use of the BUS booster in installations which are not using the VIDEX CM2 cable and it is necessary to reach large cables distances.
  • Page 65 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 2301N Entrances exchanger for VX2300 digital systems Fig. 1 Fig. 2 DESCRITPION This unit is required for systems with 2 or more entrances (4 maximum). The Art. 2301N has 4 inputs (IN1..IN4) each with adjustable amplification (“L”...
  • Page 66 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 2306N Block exchanger Art.2306N 2 Wire Bus Block Exchanger DIP-SW Fig. 1 Fig. 2 DESCRIPTION The block exchanger is used on 2 level systems where there are main entrances that call every apartment and local block entrances that only call the apartments within that block.

  • Page 67: Art. 2306N Block Exchanger

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 2306N Block exchanger PROGRAMMING The 8 way dip-switch enables the setting of the device address and the main door panel type selection. DIP-SW DIP-SW Switch status With Sw8 = ON...
  • Page 68 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 2305 Extension Relay for VX2300 digital systems Fig. 1 Fig. 2 DESCRIPTION CONNECTION TERMINALS & DIP-SWITCHES This unit can be connected directly to the bus and has two Input/Output bus connection terminals...
  • Page 69 DESCRIPTION DIP-SWITCHES AND JUMPERS (FIG. 1) Interface to connect 4+ 1 audio devices to the VX2300 “2 Wire” Bus Switches from 1 to 7 are used for unit address (from 1 (for example the Art. 380 telephone interface). Using the items to 127 binary coded).
  • Page 70 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 2380 Interface “2 Wire” to “4+1” audio system SW2 - PRIVACY DURATION TIME SWITCHES STATUS PRIVACY MODE PRIVACY DURATION (SWITCH 1) (SWITCHES 2,3) The privacy duration time is set by switches 2 and 3. When enabled the privacy...
  • Page 71 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 2380 Interface “2 Wire” to “4+1” audio system SIGNALS ON CONNECTION TERMINALS BUS connection terminals Speech line in Speech line out Speech ground Call output Ground Active low input “door open” command A2in Auxiliary active low input 2.
  • Page 72 CONNECTION TERMINALS AND JUMPERS These two power supplies are specifically designed for the Mains input VX2300 digital system. The Art.  2321 can be used for systems ~230V with 1 entrance up to 20 users while the Art. 2321/P is for sys- BUS + tems with more than 1 entrance and up to 100 users.
  • Page 73 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Art. 2322 Power supply converter from BUS line to 12 Vdc Art.2322 Fig. 1 Fig. 2 DESCRITPION When this unit is connected to the BUS line it generates a +12Vdc – 100mA power source. This unit can be used to supply periphe- rals such as the Art. 4800 or Art. 4800M without the need for an additional power supply.

  • Page 74: General Directions For Installation

    10 Ohms and can be calculated from point to point. The capac- itance of the cable must not exceed 40nF and is an accumulation of all lengths and branches of the cable. For example: Videx CM2 cable can be used for a maximum distance of 200m from door station to power supply and another 200m from power supply to videophone (400 meters) but this distance may be reduced if the maximum capacitance is reached first.
  • Page 75 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System General directions for installation CABLES LENGTH Art.KRV86 Art.3686 Art.317N Art.6286 Art.SL5488N Using Cable CM2 - Usando Cavo CM2 Art.2321 = Max 200m Using Cable CM2 - Usando Cavo CM2 = Max 200m...
  • Page 76 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Addresses 1..127 Table for dip-switch banks with ON position down VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 77 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Addresses 128..255 Table for dip-switch banks with ON position down VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 78 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Addresses 1..127 Table for dip-switch banks with ON position up VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 79 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Addresses 128..255 Table for dip-switch banks with ON position up VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...

  • Page 80: Installation Diagrams

    VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 1 ENTRANCE 5 USERS AUDIO DOOR ENTRY SYSTEM USING FUNCTIONAL TO DIGITAL DOOR PANEL VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 81 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 1 ENTRANCE “N” USERS VIDEO DOOR ENTRY SYSTEM USING DIGITAL DOOR PANEL VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 82 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams VIDEO DOOR ENTRY SYSTEM FOR “N” USERS WITH DIGITAL CODELOCK ART. 4800 VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 83 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams VIDEO DOOR ENTRY SYSTEM FOR “N” USERS WITH BUS BOOSTER ART. 2315 VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 84 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 1 ENTRANCE 10 USERS VIDEO DOOR ENTRY SYSTEM USING FUNCTIONAL TO DIGITAL DOOR PANEL VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 85 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 1 ENTRANCE 1 USER 4 VIDEOPHONES WITH LOCAL INTERCOMMUNICATION VIDEO DOOR ENTRY SYSTEM USING FUNCTIONAL TO DIGITAL DOOR PANEL VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 86 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 2 ENTRANCES (ONE AUDIO, ONE AUDIO/VIDEO) 10 USERS AUDIO/VIDEO DOOR ENTRY SYSTEM USING FUNCTIONAL TO DIGITAL DOOR PANEL AND DIGITAL PANEL VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 87 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 1 ENTRANCE 3 USER 3 INTERCOMMUNICATING VIDEOPHONES VIDEO DOOR ENTRY SYSTEM USING FUNCTIONAL TO DIGITAL DOOR PANEL PLUS ART. 2305 SET AS BUS RELAY VX2300 Digital System - Installation handbook...
  • Page 88 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 1 ENTRANCE 10 USERS VIDEO DOOR ENTRY SYSTEM USING FUNCTIONAL TO DIGITAL DOOR PANEL SHOWING HOW TO CONNECT THE CAMERA MODULE EXTERNAL VIDEO INPUT PLUS SERVICE PUSH BUTTON TO SWITCH BETWEEN TWO SOURCES VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev.
  • Page 89 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 1 ENTRANCE 5 USERS VIDEO DOOR ENTRY SYSTEM USING FUNCTIONAL TO DIGITAL DOOR PANEL SHOWING HOW TO CONNECT THE PASSIVE DISTRIBUTOR ART. 318 – ELECTRIC LOCK SUPPLIED BY AN EXTERNAL PSU VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev.
  • Page 90 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 5 ENTRANCES, “4” USERS VIDEO DOOR ENTRY SYSTEM VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 91 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 5 ENTRANCES, “4” USERS VIDEO DOOR ENTRY SYSTEM VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 92 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams 1 MAIN ENTRANCE 2 OR MORE SECONDARY ENTRANCES “N” USERS VIDEO DOOR ENTRY SYSTEM VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 93 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams EXAMPLE INSTALLATION WITH INTERCOMS AND VIDEOPHONES OF DIFFERENT TYPE VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 94 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams VIDEO DOOR ENTRY SYSTEM WITH CODELOCK ART. 4800 SUPPLIED BY THE ART. 2322 Local Bell Local Bell ART.6286 ART.6286 Extension N. Extension N. Videophone: Videophone: To next To next Art.318,...
  • Page 95 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams VIDEO DOOR ENTRY SYSTEM WITH KRISTALLO VIDEOPHONES AND FUNCTIONAL INTERFACE DOOR PANEL VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 96 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams VIDEO DOOR ENTRY SYSTEM WITH KRISTALLO VIDEOPHONES AND DIGITAL PANEL VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 97 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams VIDEO DOOR ENTRY SYSTEM WITH 6400 VIDEOPHONES AND DIGITAL PANEL To next Video Distributor Local Bell Local Bell AL-LB GND AL-LB GND +DOL +DOL -DOL -DOL +VAUX +VAUX...
  • Page 98 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Installation diagrams VIDEO DOOR ENTRY SYSTEM WITH 6400 VIDEOPHONES AND FUNCTIONAL INTERFACE DOOR PANEL To next Video Distributor Local Bell Local Bell AL-LB GND AL-LB GND +DOL +DOL -DOL -DOL...
  • Page 99 VX2300 Digital System - “2 Wire” Audio/Video Door Entry System Notes VX2300 Digital System - Installation handbook 67009600-EN - Edition 2015 - Rev. 1.0...
  • Page 100 VIDEX ELECTRONICS S.P.A. Via del Lavoro, 1 - 63846 Monte Giberto (FM) Italy Tel (+39) 0734 631669 - Fax (+39) 0734 632475 www.videx.it - info@videx.it Main UK office: Northern UK office: VIDEX SECURITY LTD VIDEX SECURITY LTD 1 Osprey Trinity Park...

Table of Contents