Operator's Manual: Seed Titan
4.3.9 Unplugging Conveyor Tube:
ENTANGLEMENT HAZARD
• Do not operate with access door open.
• Do not place hands or fingers near
rotating or moving parts.
• Do not operate without guard.
• Stop engine and remove key, before
working on the machine.
Do not operate the conveyor when:
• It is plugged with excess seed
• Hindered from moving by a foreign object.
Continued operation can cause damage to
conveyor or result in a broken conveyor belt.
If the conveyor becomes plugged, follow this
procedure:
1. Position the conveyor with easy access to
both ends.
2. Stop the engine and remove the ignition key.
3. Place a lock-out tag on the control box to
prevent accidental starting of the conveyor.
4. Open the lower access door at the bottom of
the conveyor and remove any excess seed
or obstruction.
5. Close and secure the lower access door.
6. Also check the delivery spout for blockage
and remove any obstructions.
Note:
In some extreme case it may be
necessary to remove the galvanized
belt guards and/or the belt itself.
4-12
2SE/4SE Box Seed Tender
™
Fig 77 - Conveyor tube access door
Fig 78 - Delivery spout
Revised 02.2021