Table of Contents
Advertisement
Operator's Manual: Seed Titan
4. To reposition the conveyor tube:
- Raise the handle, at the base of the tube,
to release the locking mechanism.
- Rotate the tube to the desired position.
- Lock it in place.
IMPORTANT:
The lock handle on the conveyor tube locks
into the notches in the base of the unit.
Make sure the lock handle is securely
locked in place before unloading seed.
5. Seed Titan™ 4SE shuttle movement:
The conveyor tube can slide from the front of
the seed tender to the rear by releasing the
trolley lock plate.
Make sure the trolley lock plate is in place
to prevent the trolley from moving during
unloading.
6. Always lower both jack stands, before
positioning the conveyor tube to the rear,
away from the tongue.
The jacks will support the weight of the
conveyor.
Revised 02.2021
2SE/4SE Box Seed Tender
™
Fig 45 - 2SE tube swing
Fig 46 - 4SE tube shuttle and swing
Fig 43 - Slide conveyor and lock trolley
Fig 44 - Lower jacks when conveyor is at the rear
3-15
Advertisement
Table of Contents
