Table of Contents
Advertisement
Operator's Manual: Seed Titan
2.13 OPERATING SAFETY
• Anyone who will be operating this
tender, or working around it, must
read this manual. They must know
operating, maintenance, safety info.
Review the manual annually.
• Clean or replace all safety decals if they cannot
be clearly read and understood.
• Place all controls in neutral, and stop the
engine. Remove the ignition key. Wait for
all moving parts to stop before adjusting,
repairing or unplugging.
• Keep all bystanders, especially children, away
from the machine when running.
Also, when authorized personnel are carrying
out maintenance work.
• Establish a Lock-Out, Tag-Out policy for the
work site. Be sure all personnel are trained in
and follow all procedures.
Lock-Out, Tag Out all power sources before
servicing the unit or working around equipment.
• Be familiar with machine hazard area. If anyone
enters hazard areas, shut down machine
immediately. Clear the area before restarting.
• Keep hands, feet, hair and clothing
away from all moving/rotating parts.
• Do not allow riders on the tender when moving
or transporting it.
• Keep working area clean and free of
debris to prevent slipping/tripping.
• Stay away from overhead obstructions and
power lines during operation and transporting.
Electrocution can occur without direct contact.
• Do not operate the tender when any guards
are removed.
Revised 02.2021
2SE/4SE Box Seed Tender
™
2.14 REFUELLING SAFETY
• Handle fuel with care. It is highly flammable.
• Allow engine to cool for five minutes before
refuelling. Clean up spilled fuel before
restarting engine.
• Do not refuel the machine while
smoking or when near open flame
or sparks.
• Fill fuel tank outdoors.
• Prevent fires by keeping machine
clean of accumulated trash, straw,
grease, and debris.
2-9
Advertisement
Table of Contents
