Table of Contents
Advertisement
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or
●
end-user.
In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation
●
and region. Please refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
●
100~240 VAC, 48 VDC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications
for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire
●
hazard.
Please make sure that the plug is firmly connected to the power socket.
●
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then
●
please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
Make sure that all the related equipment is power-off during the installation.
●
Do not place the product in high-temperature or damp environment, and do not expose it to high
●
electromagnetic radiation.
If the product does not function properly, please contact your dealer or the nearest service center. Do not
●
disassemble the product for repair or maintenance by yourself.
Only use the battery, power adapter and assembly parts specified by the manufacturer.
●
Consult the authorized dealer or technician from Hikvision for any question and request for product using.
●
User Manual of Portable Video Recorder
4
Advertisement
Table of Contents
