Table of Contents
Advertisement
Configure Abnormal Alarm
You can enable the voice or vibration prompt when there are abnormal alarms (low battery, or the storage is full).
Steps:
1.
Tap Config. > Abnormal Alarm.
2.
Check Voice Prompt, and there will be voice prompt when there are abnormal alarms.
3.
Check Vibration Prompt, and the device will vibrate when there are abnormal alarms.
Configure NFC
The RF card reader in type of NFC or RFID can be connected to the device, and thus the device and RF card can exchange the
data with each other.
Before you start:
Connect the RF card reader to the device.
Steps:
1.
Tap Config. > System > Connected Devices.
2.
Swipe the slider to the right side to enable NFC for data exchange.
Install Software
You can install applications according to your needs.
Only admin has the permission to install and uninstall applications.
Before you start:
Import or download an application installation package into the device.
Option 1: Download the application installation package via the web browser.
Option 2: Connect the device to computer. For detailed steps, refer to 10.3 Backup. And then import the application
installation package into internal or external storage.
Steps:
1.
Tap Config. > Software Installation.
2.
Tap the application installation package to start installing.
3.
Following the wizard to finish installation.
4.
After installing succeeded, the installed application will be listed on home page. Tap the icon to run it.
Configure Date and Time
You can configure the system data and time to meet the actual needs.
Steps:
1.
Tap Config. > System > System > Date & Time.
2.
Set the corresponding date and time parameters for the system.
Automatic Date & Time: Swipe the slider to the right side and the system will use the network-provided time
automatically.
User Manual of Portable Video Recorder
38
Advertisement
Table of Contents
