Table of Contents
Advertisement
Network
11.1.1 Dialing
2 SIM cards can be installed on the device. You can configure the preferred SIM card for cellular data network connection.
If you install 2 SIM cards, you cannot install TF card.
Before you start:
Install SIM card. Refer to 2.1 Install SIM Card for details.
SIM card has been enabled mobile data service. The function varies with network operator. The actual function
prevails.
Steps:
1.
Tap SIM Card MGT (Management) on the home page.
2.
(Optional) If you have installed 2 SIM cards, tap Cellular Data to select the preferred SIM card.
3.
Swipe the slider of Data Connection to the right side to enable the function. Or you can tap Mobile Data icon in the
notification center to enable the function.
If you have installed 2 SIM cards, you must select the preferred SIM card for cellular data connection. After the selection,
every time you enable cellular data, the cellular data service of the preferred SIM card will be enabled by default.
11.1.2 Wi-Fi
You can connect the device to the Wi-Fi networks and transmit the data via the Wi-Fi.
Steps:
1.
Tap Wi-Fi on the home page.
2.
Swipe the slider to the right side to enable Wi-Fi connection. The Wi-Fi networks available will be searched and
displayed on a list automatically. You can view the signal strength, connection status, security mode, and other
information of the networks.
3.
Select the access point on the list.
4.
Input Password.
5.
(Optional) Check Show password to display the password in plaintext.
6.
(Optional) Tap Advanced options to configure the proxy settings or IP settings.
7.
Tap Connect.
8.
(Optional) Tap Add network to add the access point manually.
1)
Input the network SSID.
2)
Select the security mode.
3)
(Optional) Tap Advanced options to configure the proxy settings or IP settings.
4)
Tap Save to save the settings. The new access point will be displayed on the Wi-Fi networks list.
User Manual of Portable Video Recorder
General Configuration
32
Advertisement
Table of Contents
