Trivet Installation - Westinghouse WFE946 Installation Manual

KICKPANEL INSTALLATION
Installing the clip-on kick panel
Selected models are supplied with a clip-on kick panel that can
be assembled to clip onto the front feet for a more integrated and
seamless kitchen appearance.
Assemble the clip snap onto the base.
Press in both assembled clip modules into the
kick panel in the orientation as shown below.
Make sure both clip modules are in the same orientation after
installation.
Clip the kick panel onto the front feet of the appliance. Make sure
the kick panel snaps onto the larger section of the front feet.

TRIVET INSTALLATION

Installing the trivets
Install the middle trivet first by aligning the trivet with the wok
burner and gently placing the trivet on hob. The middle trivet is
designed to guide the location of the side trivets. Gently place
the side trivets in the orientation shown.
2
Corner support Self-locating tabs
Corner support
2
1
Self-locating tabs
5