Join Calls to Create a Conference Call
conference call.
1. Do one of the following
When you have an active call and a held call, select the Join soft key.
When you have an active call and more than one held call, select a held call and then
select the Join soft key.
The active call and the selected held call are joined into a conference. If you have multiple
held calls, the other held calls on the line remain held.
End a Conference Call
other participants will end
1. During a conference call, select End Call.
Hold a Conference Call
conference participants on hold.
1. Select Hold
Resume a Conference Call
hear the audio of everyone on the call.
1. Select Resume.
Mute and Unmute Audio
Microphone Mute applies to the handset, headset, and speakerphone. You can still hear all
other parties when you mute your microphone.
1. During a call, including a conference call, press the mute key
The other parties cannot hear you.
2. Press again to unmute the microphone.
Page | 9
- You can join one active call and one held call into a
- When you end a conference call, your connection to the call and all
- When you place a conference call on hold, you place all
- Resuming a held conference call enables all participants to
- You can mute the microphone so other parties cannot hear you.
T:
01672 552340
E:
support@jpitsolutions.co.uk
Support hours: Mon- Fri 8:30am – 5pm