ADJ FOCUS WASH 400 User Manual page 13

INSTALLATION
CLAMP INSTALLATION
This fixture features multiple mounting clamp attachment points, as well as a safety cable attach-
ment point, located on the bottom face of the fixture (see the illustration below). When mounting the
fixture to a truss or any other suspended or overhead installation, be sure to secure appropriately
rated clamps (not included) to the clamp attachment points and attach a separate SAFETY CABLE
of the appropriate safety rating to the safety cable rigging point.
SAFETY CABLE
ALWAYS ATTACH A SAFETY
CABLE WHENEVER INSTALLING
THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE
THAT THE FIXTURE WILL NOT
FALL IF THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working
load limits, understanding the installation material being used, and periodic safety inspection of all
installation material and the fixture itself. If you lack these qualifications, do not attempt to perform
the installation yourself. Improper installation can result in bodily injury.
ADJ Products, LLC - www.adj.com - Focus Wash 400 User Manual Page 13