Chengdu Ebyte Electronic Technology Co.,Ltd.
2.4 Wireless parameter configuration
2.4.1 Configure Serial Radio
Step 1: Switch on the power supply and connect USB to RS-485 serial line (serial line A to station 485_A, serial line
B to station 485_B);
Step 2: Check whether the radio station is working in the configuration mode, if it is not the configuration mode to
enter the configuration mode according to the figure below;
Step 3: Open the configuration upper computer "RF_Se tting_E90.exe" and select the corresponding serial port;
Step 4: "Open the serial port" and click "Read the parameters", and click "Restore the factory Settings";
Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co.,Ltd.
E90-DTU(433L30)E User Manual
6