Thank you for purchasing the Air Line Kit " AL - M1203BS2 ". This Air Line Kit is designed to adjust the air Àow supply and provide automatic oil mist lubrication to the air tool. An air motor, spindle and compressor are required along with this Air Line Kit.
Page 3
CAUTION ① Use of dry air Using compressed air containing excessive moisture could result in malfunction or failure of the spindle and air motor. If excessive moisture or condensation are found in Air Filter Bowl, it will be necessary to install a dryer and larger Air Filter on the primary side of the Air Line Kit to prevent and remove excessive moisture.
3 . SPECIFICATIONS Model AL - M1203BS2 Primary Air Pressure Less than 1.0MPa Secondary Air Pressure Less than 0.85MPa Maximum Operation Pressure 1.0MPa Maximum Peak Pressure Less than 1.5MPa Maximum Peak Pressure at Hose Connection Less than 1.0MPa Filtration of the Air Filter 0.3μm Drain Reservoir Capacity 80cm...
5 . OPERATION 5 - 1 Air Filter (Fig. 2) The water, dirt and debris are separated from the compressed air. The separated debris is collected in the Bowl. 5 - 2 Automatic Drain Mechanism (Fig. 2) Upper Limit If debris has accumulated to the upper limit of the bowl, or if air pressure is not applied to the bowl, the bowl will Bowl discharge from the Drain Outlet Port by the "Auto Drain...
Page 7
5 - 4 Lubricator CAUTION ・ Make sure to turn the compressed air supply to the Air Line Kit is OFF, before replacing the Lubricating Oil or draining the water in Lubricating Oil. ・ Check the Lubricating Oil level everyday and before use. If Lubricating Oil level is low, Fill the oil bowl with Lubricating Oil up to the Upper Oil Limit on the bowl.
Page 8
6 . INSTALLATION AND CONNECTION OF THE AIR LINE KIT CAUTION The Air Line Kit must be install horizontally on a vertical surface. 6 - 1 Installation of the Air Line Kit Spacer Mount it to the vertical wall on horizontal attitude. Wall Hexagon Socket Bolt (M8×20L) Because the head of the mounting screw...
7 . TROUBLESHOOTING If a problem or concern occur, please check the following items prior to consulting your dealer. Trouble Inspection / Corrective Active Broken connection hose and supply Replace the connection hose and supply air / oil hose. air / oil hose. No air Àow.