Table of Contents
Advertisement
6 . INSTALLATION AND CONNECTION OF THE AIR LINE KIT
CAUTION
The Air Line Kit must be install horizontally on a vertical surface.
6 - 1 Installation of the Air Line Kit
Mount it to the vertical wall on horizontal attitude.
Because the head of the mounting screw
is sticking out from the Base Plate, Use the
Hexagon Socket Bolts and Spacers (Standard
Accessories : 4pcs. Each) when mounting.
6 - 2 Connection of the Air Line Kit
(1) Connect the Connection Hose (Standard Accessory) to the Primary Joint of the Air Line Kit.
(2) Connect the Filter Joint of the air motor to the
(3) Connect the DC+24V power source voltage to the electric wire of the Solenoid Operated Valve and Alarm
Buzzer.
Connection Hose
Primary Joint
Connector for Air Hose
Spacer
Hexagon Socket Bolt (M8×20L)
Base Plate
6 One - Touch Joint of the Secondary Joint of the Air Line Kit.
Spindle
Air Motor
Exhaust Air / Oil Hose
Fig. 7
Wall
Installation Surface
Mounting Screw
Fig. 6
Solenoid Operated Valve
Red (
)
＋
DC+24V
Black ( - )
6 Filter Joint
6 One - Touch Joint
Red (
)
＋
DC+24V
Black ( - )
Red (
)
＋
DC+24V
White (- )
Supply Air / Oil Hose
17
Advertisement
Table of Contents
