Sony PEG-SJ33 CLIE Handbook (primary manual) Handbook page 92

Performing the IR HotSync
Performing the IR HotSync
You can perform the IR HotSync
computer setting, CLIÉ handheld setting and Conduit Setup.
1
Rotate the Jog Dial™ navigator to select [HotSync] icon on
the Application Launcher screen and press the Jog Dial™
navigator.
The HotSync screen is displayed.
Tip
You can also tap [HotSync] icon to display the HotSync screen.
2
Tap Local.
3
Tap the arrow V and select IR to a PC/Handheld.
4
Point the IR port of your CLIÉ handheld directly at the IR port
of your computer.
For best results, your CLIÉ handheld and your computer should be 4 to 8
inches (approximately 10 to 20 centimeters) apart, and the path between
your CLIÉ handheld and your computer must be unobstructed.
5
Tap the HotSync
The HotSync
The message will be displayed to note that the HotSync
complete.
To restore the local HotSync settings
When performing the local HotSync
adapter after you set for the IR HotSync
local HotSync settings.
1
Connect your CLIÉ handheld and your computer.
2
Click the HotSync
select Local USB from the HotSync Manager shortcut
menu.
Exchanging and updating data using the HotSync
®
HotSync operations)
®
operation
®
®
operation when you have prepared your
icon.
®
operation starts.
®
operation with the USB cable and plug
icon in the Windows task tray and
operation
®
®
operation, you need to restore the
®
operation (Other
operation is
92