Tips On Beaming - Sony PEG-SJ33 CLIE Handbook (primary manual) Handbook

Beaming between your Sony CLIÉ™ handheld and another Palm OS
Receiving data via beaming
1
Turn on your CLIÉ handheld and point the IR port of your
CLIÉ handheld directly to the IR port of another Palm OS
PDA device.
The Beam dialog box is displayed and beaming of the data starts.
2
Select a category where you want to save the received data.
You can also create a new category to save the data to, or save it in the
Unfiled category.
3
Tap Yes.
The data is saved.
Note
When Beam Receive in the Preferences screen is set to Off, you cannot receive data
using the beaming feature. Prior to beaming data, set Beam Receive to On.

Tips on beaming

• Data or applications received via beaming are saved in the Unfiled category.
• You can press the Address Book
your business card.
• You can use Graffiti
tap ).
Beaming
button for about two seconds to beam
®
writing to beam data (
®
then , or and then
PDA
133