Performing The Ir Hotsync Operation; Performing The Ir Hotsync ® Operation - Sony PEG-SJ33 CLIE Handbook (primary manual) Handbook

Performing the IR HotSync
You can use the IR (infrared) port of your CLIÉ handheld supporting the IrDA
(Infrared Data Association) standard to perform the IR HotSync
with a computer equipped with an IR port. The IR HotSync
you to perform the HotSync
adapter.
Prior to performing the IR HotSync
Verify the following.
• Your computer is equipped with an IR port supporting the IrDA standard.
• The IR port of your computer is enabled for Windows operating system use.
• Check the port number allocated to the IR port.
The IR port number is available in the Infrared Monitor in the Control
Panel.
For details about the Infrared Monitor, refer to the manual of your computer or
the Windows online help.
Preparing your computer
To perform the IR HotSync
the IR HotSync
For Windows 2000 Professional/Windows XP
1
Click the HotSync
select IR from the HotSync Manager shortcut menu.
The IR HotSync
For Windows 98 Second Edition/Me
1
Click the HotSync
select Local Serial from the HotSync Manager shortcut
menu.
Exchanging and updating data using the HotSync
®
HotSync operations)
®
operation without using the USB cable and plug
®
operation, you need to allocate a virtual port for
®
operation.
icon in the Windows task tray and
®
operation is enabled.
icon in the Windows task tray and
®
operation
®
operation enables
®
operation
Continued on next page
®
operation (Other
®
operation
90