Advertisement
Quick Links
Technical Information
The New MB 410, MB 415 Lawnmowers
With its new MB 410 and MB 415 petrol lawnmo-
wers, VIKING has expanded its product line with two
new models, while simultaneously laying the foun-
dation for a new generation of lawnmowers.
The new, compact, and easy-to-service E•Line
models round off the lower end of our product
range.
The lightweight, monocoque plastic housing made
of high quality polymer is torque resistant and,
thanks to its smooth surface, easy to clean.
The MB 410 and MB 415 models are equipped with
a high performance four-stroke combustion engine
with primer carburettor and fixed throttle setting.
As with an electric lawnmower, the engine speed
remains constant during operation.
The engine is stopped via the motorstop lever.
Model MB 415 is also equipped with a heavy duty,
maintenance free single-speed gearbox for conve-
nient operation.
15.01
Advertisement
Related Manuals for Viking MB 410
Summary of Contents for Viking MB 410
- Page 1 Technical Information 15.01 The New MB 410, MB 415 Lawnmowers With its new MB 410 and MB 415 petrol lawnmo- The MB 410 and MB 415 models are equipped with wers, VIKING has expanded its product line with two a high performance four-stroke combustion engine new models, while simultaneously laying the foun- with primer carburettor and fixed throttle setting.
- Page 2 Technical Information 15.01 - Page 2 - Overview: 1. General information 6. Troubleshooting 2. Appliance overview 7. Technical specifications 3. Cutting height adjustment 8. Repair times 4. Engine oil and fuel 9. Spare parts list 5. Maintenance General information Always read the instruction manual before operating observed for repairs or maintenance, particularly for the first time.
- Page 3 Technical Information 15.01 - Page 3 - Cutting height adjustment The new MB 410 and MB 415 lawnmowers feature separate cutting height adjustment for the front and rear axles. The adjustment lever for front axle height adjust- ment is located next to the left front wheel.
- Page 4 Technical Information 15.01 - Page 4 - Maintenance IMPORTANT To avoid serious injury, the engine must always be switched off when performing maintenance work on the lawnmower. Before carrying out maintenance work, the ignition lead must always be disconnected and fastened away from the spark plug in order to prevent the engine from being started inadvertently.
- Page 5 Technical Information 15.01 - Page 5 - Sharpening the mowing blades Maintenance interval: Every 25 hours of operation If mowing results deteriorate over time, the mowing blade is probably blunt. Mower blade disassembly: Use a wood block 1 (approx. 60 x 60 mm) for disas- sembly, to counterhold the mowing blade (see illus.).
-
Page 6: Troubleshooting
Technical Information 15.01 - Page 6 - Troubleshooting Fault Possible cause Remedy - Engine will not start - Motorstop lever is not pressed - Press motorstop lever to handlebar - No fuel in tank; fuel line blocked - Top up fuel, clean fuel line - Inferior, dirty or old fuel in tank - Always use fresh, good quality fuel, normal unleaded petrol;... - Page 7 Technical Information 15.01 - Page 7 - Technical specifications Unit MB 410 MB 415 Production identification 6336 6336 Engine, design 4-stroke combustion engine Manufacturer Briggs & Stratton Type Quattro 40 Quattro 40 10D902 10D902 Capacity Power kW/rpm kW/rpm 2.2/ 3000 2.2/ 3000...
- Page 8 Drive lever Drive adjustment Spare parts list A separate spare parts list is available for the MB 410 and MB 415 lawnmowers. Standard spare parts The standard spare parts are listed below. Optimum work may only be performed if proper procedures...