4 Installation; Installation Location; Mounting - Delta RPI H3A Operation And Installation Manual

Installation
4 Installation

4.1 Installation Location

Do not install the unit near or on flammable surfaces.
Please mount the unit tightly on a solid/smooth surface
The unit should not be installed in direct sunlight.

4.2 Mounting

This unit is designed to be wall-mounted. Please ensure the installation is perpendicular
to the floor and the AC plug located at the base of the unit. Do not install the device on
a slanting wall. The dimensions of the mounting bracket are shown in the figure below.
8 ofφ5.5mm screws are required for the mounting plate(hole size: φ6.5mm). Fix the
supplied wall-mount plate securely on the wall before attaching the inverter onto the
mounting plate.
WARNING !
CAUTION !
14