Table of Contents
Advertisement
J: Chime Feature
The chime feature can be used on door
contacts to enable a 'chime' sound when
a door (input) is opened for example. It
may used on any input on the system.
This feature can be set up by your
installer.
To disable the chime on the keypad,
close all doors and when 'c' is displayed,
press the c key, a capital 'C' will
be displayed, this will then activate
the chime on any additional keypads
installed. If you wish to disable the
chime altogether press the c key
again.
NOTE: If using wireless movement
detectors on the system it is not
recommended to have chime enabled
for these detectors as this will drain the
battery.
PCX 46
Time 4:40am
12
K: Personal Attack From Keypad
If a PA alarm is needed, press and hold
both the 1 and 7 keys or hold p
for 3 seconds and a 'PA' alarm will be
generated.
Note: The PA facility needs to be enabled
by your engineer (either silent or audible
alarm option)
Please note that the keyfob can also be
programmed to support a PA alarm.
Please discuss this with your engineer.
c
Alarm Silenced
Keypad PA
L: Fire Alarm From Keypad
If a fire alarm is needed, press and hold
f for 3 seconds and a 'fire' alarm will be
generated.
Note: The Fire alarm key need to be
enabled by your engineer.
Alarm Silenced
Keypad Fire
Advertisement
Table of Contents
