Adjusts The Vox Anti-Trip Sensitivity - Yaesu FTDX10 Operation Manual

• Adjusts the VOX anti-trip sensitivity

The Anti-Trip setting sets the negative feedback
of receiver audio to the microphone, to prevent re-
ceiver audio from activating the transmitter (via the
microphone).
1. Press the [FUNC] knob.
2. Touch [ANTI VOX] .
3. Rotate the [FUNC] knob to prevent receiver au-
dio from activating the transmitter (via the micro-
phone).
MOX
Pressing this key engages the PTT (Push to Talk)
circuit to activate the transmitter.
PHONES Jack
Connect headphones to this standard ϕ3.5 stereo
jack.
Inserting a headphone plug into this jack will deacti-
vate the internal and external speakers.
When wearing headphones, we recommend
that you turn the AF Gain levels down to
their lowest settings before turning power
ON, to minimize the impact on your hearing
caused by audio "pops" during switch-on.
AUDIO (VFO-A/B)
AUDIO (VFO-A/B)
MIC
This 8-pin jack accepts input from a microphone uti-
lizing the traditional YAESU HF transceiver pinout.
SD memory card slot
A commercially available SD memory card may be
used to save transceiver settings, to save the mem-
ory contents, to screen capture and to update the
firmware.
• The SD card is not provided with the prod-
uct.
• Not all SD cards sold commercially are
guaranteed to work with this transceiver.
GND
DOWN
UP
+5V
MIC GND
MIC
PTT
GND
FAST
WIRE STAND
The heavy wire stand on the bottom of the
transceiver allows the transceiver to be tilted
upward for better viewing. Simply fold the
stand forward to raise the front of the trans-
ceiver, and fold it back against the bottom
case to lower the front of the FTDX10.
33