How To Assign Functions - Yaesu FTDX10 Operation Manual

STEP/MCH
STEP
Press the [STEP/MCH] key to turn ON the LED of
the [STEP/MCH] key and "STEP" indicator. Turning
the MPVD ring changes the frequency in 10kHz
steps (factory default settings).
The frequency steps of the step dial function can
be changed by the following operations:
1. Press the [FUNC] knob.
2. Select [OPERATION SETTING] → [TUNING] →
[CH STEP].
3. Rotate the [FUNC] knob to select the frequency
step.
Can be select from 1kHz / 2.5kHz / 5kHz /
10kHz.
4. Press the [FUNC] knob to save the new setting.
5. Touch [BACK] several times to return to normal
operation.
STEP
Press and hold the [STEP/MCH] key for 1 second
or longer, the LED of the [STEP/MCH] key will
blink, and turn the MPVD ring ON in memory mode,
and it will switch the memory channels.
38
C.S (Custom Select)
By simply pressing the [C.S] key, the MPVD ring
operates in the function that has been assigned to
the [C.S] key (see below) (default setting is LEV-
EL).
LEVEL Adjust the level of the 3DSS display.
Adjust the Peak Signal Color Densi-
PEAK
ty.
Adjust the contrast of the TFT dis-
CONTRAST
play.
Adjust the brightness of the TFT dis-
DIMMER
play.
M-GROUP Memory group selection.
MIC GAIN
Microphone gain adjustment.
PROC LEVEL Adjusts the Speech Processor Gain
Adjusts the AMC (Automatic Micro-
AMC LEVEL
phone Gain Control) Gain.
VOX GAIN VOX gain adjustment.
VOX DELAY VOX delay adjustment.
ANTI VOX
ANTI VOX adjustment.
RF POWER Adjusts transmission output.
MONI LEVEL Adjusts the Monitor level.
CW SPEED
Adjusts the desired sending speed.
Adjusts the CW tone when receiving
CW PITCH
the CW signal and the side tone
monitor.
Adjust the hang time after the CW
BK-DELAY
transmit keying ends.

• How to assign functions

1. Press and hold the [C.S] key.
The function selection screen is displayed.
2. Touch the desired function to assign it.