Interface Attributes; Interface Leds - H3C MSR 20 Series Manual

Interface Card and Interface Module Manual
H3C MSR 20/30/50 Series Routers
Manual ADSL line activation and deactivation, providing a convenient fault
location means.
Interface standards of G. DMT, G. Lite, and T1.413, auto-sensing.
Trellis coding (except for G. Lite) on ADSL interfaces, enhancing the stability of
ADSL connection.
Note:
For H3C MSR 20-40 and MSR 30/50 series routers, a SIC-1ADSL interface card can
only be installed in SLOT2 or SLOT4.

2.11.2 Interface Attributes

Table 2-25 Interface attributes of the SIC-1ADSL
Connector
Number of connectors
Interface rate
Interface standard
Cable
Supported service

2.11.3 Interface LEDs

The following figure illustrates the SIC-1ADSL panel.
Attribute
RJ-11
1
8 Mbps (downlink rate)
1024 kbps (uplink rate)
64 kbps to 1 Mbps (downlink rate)
64 kbps to 512 kbps (uplink rate)
24 Mbps (downlink rate)
1024 kbps (uplink rate)
ITU-T 992.1 G.DMT
ITU-T 992.2 G.Lite
ANSI T1.413 Issue 2
ITU-T 992.3
ITU-T 992.5
Telephone cable
ADSL over the regular telephone line
SIC-1ADSL
In ADSL full rate mode (ITU-T 992.1 G.DMT/ANSI
T1.413):
In ADSL Lite mode (ITU-T 992.2 G.Lite):
In ADSL2+ full rate mode (ITU-T 992.5):
2-39
Chapter 2 Smart Interface Cards