BenQ EW2730 User Manual page 38

CEC
(EW2730 only)
HDMI Auto
Switch
Auto Power Off Sets the time to power off the
Information
Reset All
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for
remote diagnostics.
38 How to adjust your monitor
When activated and the
monitor is connected to a
multimedia device
supporting CEC feature
through HDMI, the device's
remote control can be used
to turn on the device and the
monitor simultaneously. If
the monitor is switched off,
the device is off as well.
Synchronization with other
devices through HDMI
CEC may be available but
not guaranteed.
When this function is
activated, HDMI port will be
in the input auto select loop.
Otherwise, HDMI can only
be selected by input select or
by hot key.
monitor automatically in
power saving mode.
Displays the current monitor
property settings.
Resets all mode, color and
geometry settings to the
factory default values.
Press the key to select
ENTER
this option. Press the
keys to change the
settings.
Press the key to select
ENTER
this option. Press the
keys to change the
settings.
Press the key to select
ENTER
this option. Press the
keys to change the
settings.
Press the or keys to
change the settings.
• ON
• OFF
or
• ON
• OFF
or
• OFF
• 10min.
or
• 20min.
• 30min.
• Input
• Current
Resolution
• Optimum
Resolution (best
with the
monitor)
• Model Name
• YES
• NO