Table of Contents
Advertisement
To set up DANTE CONTROL ID
The Dante Control ID needs to be set to remotely control the Rio series head amps.
To use multiple HY144-D/-SRC cards, set a unique ID for each card (except for ID OFF).
1. Open the HY SLOT window, and then press the DANTE SETUP button.
2.
Choose the ID number from the DANTE CONTROL ID field.
To connect more than four cards
However, please note that the cards whose ID is set to off cannot remotely control the head
amps.
For details about ID settings, see the RIVAGE PM Operation Manual.
*1 This includes multiple DSP engines in the same Dante network.
in one network, set the fifth and subsequent cards OFF.
*1
19
Advertisement
Table of Contents
