Yamaha Audioversity Rivage Pm Series Network Setup Manual page 13

Table of Contents

When using two separate Wi-Fi access points in different subnets:

Specify an IP address in a different subnet (network address) for both the CONSOLE IP

SETTING and the DSP ENGINE IP SETTING.

•

Example of IP settings

CONSOLE IP

StageMix

Wi-Fi Access Point for StageMix

DSP ENGINE IP

MonitorMix

Wi-Fi Access Point for MonitorMix

Press the ENABLE buttons of the CONSOLE IP SETTING and DSP ENGINE IP

SETTING to turn them on.

Do not share a Wi-Fi access point with more than one RIVAGE PM system

by connecting their NETWORK [PC] connectors to the access point.

IP Address

192.168.0.10

192.168.0.xxx

192.168.0.1

192.168.1.10

192.168.1.xxx

192.168.1.1

Subnet Mask

255.255.255.0

Table of Contents