Yamaha Audioversity Rivage Pm Series Network Setup Manual page 18

3. Press the NETWORK button.
4. Input the SLOT IP SETTING.
Make sure to specify an IP address that is in the same subnet as the Dante network. The
following IP addresses cannot be used for the STATIC IP of the SLOT IP SETTING.
• 192.168.53.xxx /24
172.17.xxx.xxx /16 - 172.24.xxx.xxx/16
(These are reserved for RIVAGE PM systems.)
169.254.xxx.xxx /16 (Link-local addresses)
•
Multicast addresses
•
Use an IP address in a different subnet from the IP address that was assigned in the DSP
ENGINE IP SETTING.
*1 To use a link-local address, use the AUTO (DHCP) to set the IP address.
*1
18