Changing The Administrator Username And Password - Cisco FM PONTE-50 Installation And Configuration Manual

7.7.2. Changing the Administrator username and password

The CHANGE USERNAME AND PASSWORD section contains controls
to change the Administrator's user name and password for the Fluidmesh
unit.
IMPORTANT
Changing the default password to a strong password is an
extremely important step in preventing security breaches.
If you have logged into the configurator interface using default
administrator's credentials, you will see a notification banner at
the bottom of the screen
Figure 38. Default admin credentials notification banner
Click the banner to change the admin credentials. You will be
taken to the CHANGE USERNAME AND PASSWORD
section.
To change the Administrator's user name and password for the unit, do
the following steps:
1. Click the -remote access link under MANAGEMENT SETTINGS
in the left-hand settings menu.
• The CHANGE USERNAME AND PASSWORD dialog will
be shown
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
(Figure 38 (page
(Figure 39 (page 86)).
85)).
Page 85 of 132