Table of Contents
Advertisement
Figure 25. Advanced Tools window (Bandwidth test tool)
3.
Click the Run button to the right of the IP address field.
• The bandwidth test result will be shown below the test
controls.
Using the Path MTU discovery tool
The Path MTU discovery tool tests the size of the maximum transmission
unit (in other words, the largest protocol data unit that can be
communicated in a single network layer transaction).
To use the Path MTU discovery tool, do the following steps:
1.
Determine what wireless link is to be tested between the
Fluidmesh unit and another unit in the wireless network. Get the
IP address of the other unit.
2.
Enter the IP address of the second unit in the Path MTU
discovery field
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
(Figure 26 (page
70)).
Page 69 of 132
- Quick Links:
- Unit Configuration
Hide quick links:
Advertisement
Table of Contents
