Danfoss ECtemp Next Plus HW Installation Manual page 12

ECtemp Next Plus HW
11 Keypad lock
• When thermostat power on, press "
press "
anyone operated. Display will show "
operation, the function will be disable.
12 Resetting
• When thermostat turns off, press "
reset the value. Display shows all icons, after resetting,
thermostat will turn on automatically. Resetting
operation includes programming default value and timer
default value.
13 Frost protection temperature
• When the thermostat turns off, display shows "
means the function of low temperature protection is
able. When the water temperature is lower than 5 °C, it
will be turned on automatically in heating mode with
" " showing and will connect with heating
equipment; the thermostat will turn off output when
water temperature is higher than 7 °C.
12 | © Danfoss | Produced by FEC | 2020.10
" simultaneously, keypads are locked for fear
" button then
", repeat the
" for 10 seconds to
", it
AN347136888492-010101