AEG KEE541020M User Manual page 10

10 www.aeg.com
Clock func-
tion
MINUTE
MINDER
00:00
COUNT UP
TIMER
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
the minutes.
The display shows
hour. "00" flashes.
3. Press
minutes.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
7.3 Setting the DURATION
1. Set an oven function.
2. Press
starts to flash.
Application
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
If you do not set any oth-
er clock function the
COUNT UP TIMER auto-
matically monitor how
long the oven works.
It is on immediately when
the oven starts to heat.
The Count Up Timer can-
not be used with the
functions: DURATION,
END, core temperature
sensor.
and
or to set the hours.
to confirm and switch to set
and the set
or to set the current
to confirm or the set time of
flashes in the display.
again and again until
3. Press or to set the minutes and
then the hours. Press
When the set Duration time ends the
signal sounds for 2 minutes.
setting flash in the display. The oven
turns off automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the oven functions
to the off position.
7.4 Setting the END
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the hours and
then the minutes. Press
confirm.
At the set End time the signal sounds for
2 minutes. and time setting flash in
the display. The oven turns off
automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the oven functions
to the off position.
7.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes and
then the hours for DURATION time.
Press to confirm.
The display shows flashing
4. Press or to set the hours and
then the minutes for END time. Press
to confirm.
Oven turns on automatically later on,
works for the set DURATION time and
stops at the set END time.
At the set END time the signal sounds
for 2 minutes. and time setting flash
in the display. The oven turns off.
5. Press any button or open the oven
door to stop the signal.
6. Turn the knob for the oven functions
to the off position.
to confirm.
and time
to
.