Table of Contents
Advertisement
Safety Warnings
High Voltage
This product produces potentially lethal voltages up to 282 Vrms.
Observe Low-Voltage (as per ANSI C84.1-1989) safety precautions, e.g.
● Use an observer trained in low-voltage rescue
● Do not operate with exposed conductors
● Use appropriate signage, etc.
Revision History
Date
Manual
6/02/2020
R8
31/10/2020
R7
15/01/2020
R6
Quick Start Recommendations
Most users will need to read the following sections in detail to gain an understanding of transducer
characteristics and the various operating modes. That is, read the following sections in order.
If you already have expert knowledge of ultrasonic transducers and their different operating
modes, go straight to the section on Desktop Software.
Delivery Contents (Standard)
PDUS210 Amplifier (in chosen configuration)
Handheld controller
Handheld controller cable (DSUB9 3ft)
280W Desktop power supply
IEC Power cable suited to the destination shipping address
USB Cable (Type A)
3 Way plug-in screw terminals for output (Amphenol TJ0331530000G)
4 Way plug-in screw terminal for RS-485 connector (Amphenol TJ0431530000G)
PDUS210 V4
Added recommended impedance range
Added support for external transformers
Minimum frequency changed to 6 kHz
Added frequency range specifications
Added 175V version
Added notes to "Standard Output Voltage Ranges"
Changes
3
Modified 6/02/2021
Advertisement
Table of Contents
