Pdus210-Flex Specifications - PiezoDrive PDUS210 Manual

PDUS210-FLEX Specifications

The PDUS210-FLEX is identical to the standard PDUS210 except that it requires an external
transformer connected between the amplifier and transducer using the supplied cable. This allows
the user to switch between different output voltage ranges by changing the external transformer.
Please refer to the section PDUS210-FLEX Operation for instructions.
The PDUS210-FLEX must be purchased with at least one external transformer. The available part
numbers and specifications are:
Order Code Turns
Ratio
TX210-800 18.18
TX210-600 13.64
TX210-400 9.09
TX210-200 4.55
TX210-175 3.98
TX210-100 2.27
TX210-50 1.14
Table 2. External transformer specifications (only for the PDUS210-Flex)
A kit containing six transformers ranging from 17Vrms to 282Vrms is also available (TX210-Kit1).
This includes the following output voltage ranges: 17, 35, 70, 141, 212, and 282 Vrms.
Specification
Input Connector
Output Connectors
Transformer Dimensions
Mass
PDUS210 V4
Voltage Voltage
pk-pk RMS
800 282
600 212
400 141
200 70
175 62
100 35
50 17
Figure 2. Output transformer (e.g. TX210-800)
Value
Plug-in screw terminal
Identical to PDUS210
104 x 57 x 51 mm
0.2 kg
Table 3. External transformer mechanical specifications
Amps Amps Optimal
pk-pk RMS Load Ohms
2 0.71
2.6 0.92
4 1.4
8 2.8
9.1 3.2
16 5.7
32 11.3
8
Load Range
Ohms*
260 – 840
400
146 – 472
225
65 – 210
100
16 – 52
25
12 – 40
19.1
4 – 13
6.25
1.56 1 - 3
Notes
Connecting cable supplied
See "Front Panel" section
L x W x H
Modified 6/02/2021
Frequency
kHz
20 – 200
20 – 200
20 – 200
20 – 200
10 - 100
20 – 200
20 – 200