Table of Contents
Advertisement
1
Introduction
The TD250 is an ultra-low noise, six-channel voltage amplifier with a bipolar 250V output range. The
six channels can be driven independently, or configured as three channels with non-inverting and
inverting outputs, which are ideal for driving piezoelectric tube scanners. The three-channel
configuration can also be used to obtain +/-500V with a bridged load.
The TD250 can drive unlimited capacitive loads such as piezoelectric tubes, stack actuators,
standard piezoelectric actuators, and bender actuators. Applications include, nanopositioning,
microscopy, electro-optics, vibration control, and piezoelectric motors.
The output connector is an industry standard 9-Pin D-Sub connector. A breakout board is also
available which provides BNC connectors for each output and a plug-in screw-terminal connector.
OEM and customized versions are also available.
2
Warnings / Notes
This device produces hazardous potentials and should be used by suitably qualified personnel
under the supervision of an observer with appropriate first-aid training. Do not operate the device
when there are exposed conductors.
High-Voltage
3
Advertisement
Table of Contents
