Rehau NEA SMART 2.0 End User Manual page 11

Display of temperature
Shows the current room temperature or
the desired room temperature.
Display of room humidity
Shows the relative humidity in the
room.*
Display of the operating mode
Heating mode
Heating mode is active
Cooling mode*
Cooling mode is active
Operating status
Standby
Heating and cooling mode disabled
Timer programme
Room is controlled via the timer
programme
When the symbol for timer programme is displayed,
the set operating status is displayed afterwards
(Normal or Reduced).
Manual
User has changed the desired tempera-
ture; valid until the next switching point.
Normal
Operating mode Normal is active
Reduced
Operating mode Reduced is active
(energy-saving mode)
Transitional phase Normal
Transitional phase Normal to Reduced
operating mode
* Is displayed if this function can be activated or if a sensor is integrated.
End user manual
Transitional phase Reduced
Transitional phase Reduced to Normal
operating mode
Party
Party mode is active
Holiday
Holiday mode is active
Room unit locked
Buttons are locked
Error message
Warning message
Low battery
The battery of the Room unit must be
replaced.
Window open
An open window has been detected in
this room.
Condensation
High humidity – risk of condensation
Frost protection active
Frost protection has been activated as
the temperature has fallen below 5 °C;
the heating valve is activated.
Connection status
No connection
There is no connection to the Base.
11