Angle Adjustment - NORAUTO 2274267-NO0532-Z303 Safety Information Manual

ANGLE ADJUSTMENT

CAUTION: Before securing a child in the child restraint system, the seat must be set on the
recline position for forward-facing use. It can be adjusted to 4 positions, as shown in the
pictures below.
Different groups use different reclining levels:
• Group I (9-18KG): positions from 1 to 4
• Group II, III (15-36KG): position 1 only
1. To adjust the angle, push the recline
handle and adjust the seat to the
desired position.
2. Release the handle.
audible CLICK! The display window
turns into a green colour.
This child restraint has 4 recline positions.
Recline can be changed for child comfort or to improve the installation of child restraint.
NOTE: If the display window does not turn into a green colour, pull or push the seat until it
click into place and the indicator turn t into a green colour.
CAUTION: Before securing the child into the child restraint, ensure that the
turns into a green colour.
5-POINT HARNESS REMOVAL AND ACCESSORY STORAGE
1. To remove shoulder pads and straps, first loosen the 5-point harness of the child
restraint as much as possible. Then, remove the straps from the metal links. Store the
straps on the back of the backrest.
2. Remove the shoulder pads from the shoulder straps.
3. Take the gears fixed axle from the
plastic stator and store it on the
back of the backrest.
4. Finally, insert redundant belt into
cloth cover.
5. To store a buckle,
release button to release the
buckle tongues.
6. Pull down the buckle cover.
7. Lift the cover in the PE board and hide the buckle.
You will hear an
press the straps
EN
display window
71