Graco ProMix PD2K Repair Parts Manual page 21

Maintenance Error Codes
Perform the required maintenance if the following codes occur.
Code Type
END# Record
ENS0 Record
ENT# Record
MAD# Advisory
MAT# Advisory
Advisory
MEB#
MED# Advisory
MEF# Advisory
MEG# Advisory
Advisory
MES#
MFF# Advisory
MFS0 Advisory
MGH0 Advisory
Advisory
MGP0
3A2800B
Name
Calibration Pump #
Calibration Solvent
Meter
Calibration Stall Test
Pump #
Maint. Outlet Pump #
Maint. Stall Test
Pump #
Maint. Valve Catalyst
(B) #
Maint. Valve Outlet #
Maint. Valve Inlet #
Maint. Valve Gun #
Maint. Valve Solvent
#
Maint. Meter Flow #
Maint. Meter Solvent
Maint. Filter Fluid
Maint. Filter Air
Description
A calibration test was run on the pump.
A calibration test was run on the solvent meter.
A stall test was completed successfully on pump #.
Maintenance is due on pump.
Maintenance stall test is due on pump.
Maintenance is due on catalyst valve.
Maintenance is due on outlet valve.
Maintenance is due on inlet valve.
Maintenance is due on gun valve.
Maintenance is due on solvent valve.
Maintenance is due on flow meter.
Maintenance stall test is due on solvent meter.
Maintenance is due on fluid filter.
Maintenance is due on air filter.
Troubleshooting
21