Wayne EHASR-DC Manual page 29

1. Identify which E burner model you have and set the gun depth accordingly.
2. To position the gun assembly forward or backwards, loosen the gun assembly 3/8-24 hex lock nut with a 9/16
inch wrench and the 5/16 inch hex slotted slot cover screw as shown in Figure 19.
Arrow
Decal
5/16 inch
Hex slotted screw
Figure 19– EH-DC/EHASR-DC Oil Gun Depth Adjustment
3. Once in the required position per
move and align arrow decal with slot plate cover.
buss bars. Take care not to pinch the ignition transformer lead wires between the housing and cover plate. Reinstall
the igniter plate hold down clip and tighten the 5/16-18 hex slotted screw securely.
Figure 18– EHASR-DC Gun Depth Settings
Figure 17
and
Close the ignition transformer and assure there is a positive spring contact with the brass
Figure 18
, retighten the hex lock nut and slot cover screw,
29
3/8-24
Hex lock nut