Midea MAW25R1YWT User Manual page 17

Fig. 20
Plastic Frame
Window
Accordion
Panel
Fig. 21
Side Retainer
TOP VIEW
Air Conditioner
Cabinet
I
"I" Section
"
Fig. 22
Sill
2 Install Top Rail and Side Bracket
1. Attach foam gasket to top rail above holes as
shown in Fig. 20.
2. Install top rail and side retainers to cabinet as
shown in Fig. 20.
3 Assemble Window Accordion Panels
1. Place cabinet on floor, a bench, or a table.
2. Slide "
side retainer on the side of the cabinet (see Fig.
21 & Fig. 22). Do both sides.
Plastic
Frame
Locking
Screw
" Section
Window
Hole
Accordion Panel
4 Place Cabinet in Window Opening
Fig. 23
1. Open window and mark center of window sill as
shown (Fig. 23).
2. Place cabinet in window with bottom sill angle
firmly seated over window sill as shown. Bring
window down temporarily behind top rail to
hold cabinet in place (Fig. 24).
Fig. 24
Sill Angle
I
" section of window accordion panel into
3. Insert top and bottom legs of window
accordion panel frame into channel in
the top rail and bottom rail. Do both
sides.
4. Insert washer head locking screws (2)
into holes in top leg of accordion panel
frame (see step 6). Do not completely
tighten. Allow leg to slide freely. Screws
will be tightened after section 6.
 Page 17 