Midea MAW25R1YWT User Manual page 16

4. Pry away front from cabinet sides as shown in Fig. 15 and then disconnect the
connector plug of the display panel from the unit (see Fig. 16).
5. Gently lift front off unit and place to one side (see Fig. 17).
Fig. 15
Fig. 18
Internal
packing
Plastic
tie
Fig. 19
 Page 16 
Connector
Fig. 16
plug
6. Remove shipping screws from top of
unit and also on the side by the base
if installed.
7. Hold the cabinet while pulling on the
base handle, and carefully remove
the unit.
8. Add two foam inserts to holes in top
of cabinet where shipping screws
were removed from (see Fig. 18).
9. Your unit may come with internal
packaging. This packaging must be
removed prior to installing the air
conditioner back into the cabinet.
(see Fig. 19).
Fig. 17